溫控儀調整說明書

• 按一下SET顯示CLK勿動
• 按二下SET顯示132勿動
• 按三下SET顯示AL1勿動
• 按四下SET顯示（     ）按上下鍵調整你所需要的溫度。
• 按五下SET顯示AL2勿動
• 按六下SET顯示（     ）按上下鍵調整你所需要的溫度，比第四步的溫度高10度。
• 按七下SET顯示AH1勿動
• 按八下SET顯示02勿動
• 按九下SET顯示AH2勿動
• 按十下SET顯示02勿動
• 按十一下SET按十下即可。

Temperature controller adjustment instructions

1. Press SET to display CLK（press one time set button, this is the first time）

2. Press SET to display to be 132(press one time set button, this is the second time)

3. Press SET to display AL1(press one time set button, this is the third time)

4. Press the SET display four times (  ) ,then to adjust the temperature you need, like75℃。

  This is the control temperature, if more than 75℃, then machine will turn off some microwave.(press one time set button, this is the fourth time)

5. Press SET to display AL2(press one time set button, this is the fifth time)

6. Press the SET display ( ) to adjust the temperature you need, in general 10 degrees higher than the temperature of the fourth step, we suggest 130℃ for you; this the maximum temperature, if more than 105℃, then the machine will be turn off automatically, you need to start the machine by hand.(press one time set button, this is the sixth time)

7. Press SET to display AH1(press one time set button, this is the seventh time)

8. Press SET to display 02(press one time set button, this is the eighth time)

9. Press SET to display AH2(press one time set button, this is the ninth time)

10. Press SET to display 02(press one time set button, this is the tenth time)

11. Press the SET button and press the button.(press one time set button, this is the eleventh time)

Note: 1.every step only press one time set button; only step4 and step6 after press one time set button, then need adjust the up or down button.

2.after finished the eleventh pressing to the set button, the display will be back automatically.

3.If the temperature more than 130℃, the spray system will open automatically.